Two trucks that look identical can carry different engines, and the water pump, oil pump, liner kit or starter that fits one does not fit the other. Before you order, find the engine code. Here is where it is on the trucks our customers run.
Isuzu (N-series NPR, NQR, NKR, NHR; F-series FRR, FSR, FTR, FVR; pickups)
Codes: 4JA1, 4JB1, 4HF1, 4HG1, 4HK1, 4HE1, 6HE1, 6HH1, 6HK1, 6BD1, 6BG1, 4BD1, 4BC2, C240. The code is stamped on a machined pad on the cylinder block (the side varies by model; look near the injection pump) and printed on the chassis plate in the cab door frame. The 4HK1 (5.2 L, common rail) replaced the 4HF1 and 4HG1 (4.3–4.6 L, mechanical), and their pumps and liners differ: the oil pump 8-97147-338-1 covers 4HF1, 4HG1 and 4HK1, while 8-97075-283-3 is for the 4HF1 and 4HE1.
Mitsubishi Fuso (Canter, Fighter, FM and FN, Rosa, buses)
4D30 to 4D36 for the Canter and Rosa; 6D14 to 6D17, 6D22 and 6D24 for the Fighter and heavy trucks; 8DC9, 8DC11, 6M60 and 6M70 for heavy and newer models. Stamped on a pad on the cylinder block and printed on the cab plate. The 4D34 (3.9 L turbo) is the Canter engine most of our customers run; its oil pump is ME-017484. The Fighter’s 6D17 takes ME-074253.
Hino (300 Dutro, 500 Ranger, 700 Profia, older FF, FG and FM, buses)
W04D and W04C for the Dutro; J05C, J05E, J07C, J08C and J08E for the Ranger and 500; EK100, EF750, EH700, EM100, EB300 and EB400 for the older heavy trucks; K13C, E13C and P11C for the Profia. The code is on the engine plate on the block and on the frame plate inside the passenger door. We still hold a full EK100 range, from the oil pump 15110-1013 to the crankshaft PCR-EK100.
UD / Nissan Diesel (CW, CK, CD, CM, PK, MK and LK series)
FE6 and FE6T (Condor, CM), PD6, PE6 and PF6, RD8, RE8, RF8 and RG8 (CW heavy trucks), ND6 and NE6, GE13 and MD92 (Quon). The plate is on the block near the injection pump and on the cab frame plate. The second block of a UD part number often repeats the series, so the FE6 starter is 23300-Z5570.
Toyota and Nissan pickups and 4×4
Toyota: the engine code is stamped on the block (2L, 3L and 5L near the injection pump; 1KD and 2KD on the engine plate) and printed on the VIN plate under the bonnet on the “ENGINE” line. The Land Cruiser’s 1HZ takes the water pump 16100-19235. Nissan: TD27, TD42, ZD30 and QD32 are stamped on the block and printed on the plate under the bonnet.
What to photograph
- The stamped code or the engine plate.
- The chassis plate: model, year and engine.
- The old part with its number.
Send the three photos with your list on WhatsApp. With them we confirm the correct part numbers in one reply, before anything is shipped.